Hopper capacity: 8m³*4
Asphalt Hot Mix Plant LJB1500C is developed on the basis of Japan technology. The machines are suitable to mix kinds of asphalt mixture, widely used for the construction of high grade asphalt roads and urban roads. It is batching plant. Each aggregate, filler and bitumen are metered by electronic weigher. Industry control computer is used for operation to ensure the plant reliability.
Plant Capacity
To mix 1500kg asphalt each batch
If average moisture content is 5%, and mixing cycle is 45s, output is 120 t/h (middle sized)
If average moisture content of sand is 5%, and mixing cycle is 60s, output is 90 t/h (small sized).
Material temperature: 140℃-160℃
Conditions concerned with output are as follows:
1. Average moisture content only refers the surface moisture content, moisture content inside will lower the output ability of drying drum.
2. Ambient temperature is 20℃.
3. Material density is 1600kg/m3.
4. Output includes filler and bitumen.
5. The proportion of aggregate must be correct and the specifications must meet the standard demand.
6. Filler density is 1120kg/m3.
Parameter
Throughput (t/h) 90-120
Batch Mixer (kg/batch) 1500
Drying Drum (mm) ø2100*8000
Vibrating Screen four floors and four size
Agg. Accumulated measuring Accuracy ±0.5%
Filler Measuring Accuracy ±0.35%
Bitumen Measuring Accuracy ±0.25%
Noise near Operator dB(A) ≤70
Dust Draining Density (mg/Nm³) Bag dust collecting≤100
Cold Agg. Hopper Capacity 8m³*4
Mixing Cycle (second) 60-45
Bitumen Tanks Capacity 30m³*2
Mixed Material Silo (t) 80 (Optional)
Control System Manual/semi-auto/auto operation system
Installed Power (kW) 320 (Whole equipments)
