LTL60C asphalt paver is used to pave asphalt for highway, urban road, plaza, and parking lots etc . It is the ideal machine for road construction.

The machine is mechanical - hydraulic driving and is equipped with hydraulically extension screed and automatic leveling unit. LTL60C asphalt paver can pave the road with good leveling and high density. The vulnerable parts use advanced wearable material to secure the performance.

Main Performance

1.  China 4JR3AG7 engine with air cooling

2. Independent & right conveyor and screw feeder

Independent operation for L/R conveyor and screw feeder, easy operation. Screw feeder is pieced mechanically. Screw feeder blade is made of wearable material, convenient replacement to ensure screw life.

3. Wide Eyeshot and Removable Operation Platform

All the control elements centralize on operation platform for easy operation. Operation platform can be moved right and that can reduce job of operator and improve efficiency to guarantee pavement quality.

4. Auto Leveling Units to offer Reliability for Road Smoothness

The machine is equipped with one longitudinal and one transverse automatic leveling probes, grade smoothness 3mm/3m and slpe smoothness 2/1000, which reaches the demand of high-grade road smoothness. It controls in time, convenient and intuitionistic. It can prevent the asphalt from valid filling to reduce construction cost.

5. Extendable Screed with world advanced wearable material at bottom

Stepless extendable screed can offer different paveing width easily and fast.

6. Solid and durable crawler’s device, which offers powerful traction

Thrust wheel can be adjusted by floating unit and machine’s height to ensure driving smoothly, especially when paving on rough roadbed. Crawler traveling device is consisted of permanent lubricated thrust wheel and track shoes, which is durable, good adhesive and no easy slipping.

7. Advanced electrical technology, all the control elements and wires are numbered according to the electrical drawings for easy fault check.

Note: All the technical specifications mentioned above will maybe change as the technology development. Please refer to the final offer.

Model: LTL60C

Type:  Crawler

Parameter

Paving Width (mm)                    2500-6000

Paving Thickness (mm)                 10-250

Paving Speed (m/min)                  2.03~6.07

Traveling Speed (km/h)                 1.55~4.62

Engine Power (kW)                    55

Hopper Capacity (t )                    10

Max. Theoretical output (t/h)             220

Weight (kg)                          11000-12000

Overall Size                          5820*6034*2995 (operation)

5820*2494*2450 (transportation)

Engine                     four cylinders, air cooled engine 55Kw/2000r/min

Technical Specifications

Drive System

The whole machine is driven mechanically-hydraulically. Flywheel end of engine is connected with transfer case. The front of engine is connected with split flow pumps to supply power to the components as follows:

1. crawler traveling devices

1.

2. conveyor and screw feeder

2.

3. vibrating device

3.

4. hopper folded in & out, screed up & down and other cylinders action

Traveling Device

It is consisted of gear box, transfer case, traveling clutch and chain transmission.

The driven chain wheel activates the crawler.

Weight Bearing Mode

There are two crawlers. Each crawler ground touch area is 2672*300mm.

Steering

The traveling clutch is operated by hydraulic cylinder. The brake can make the machine turn at former place.

Hopper

The capacity is 10 tons and operated by hydraulic cylinder for entire discharge.

Push Roller

The roller can swing to push the truck rear wheels.

Conveyor

Left and right conveyor is independently driven. Hydraulic cylinder controls the conveyor clutch and also controls the chain transmission to run the feeder.

Electrical System

The system is equipped with two batteries. The voltage is 24V.

Canopy

It is consisted of steel tube and cloth.

Automatic Leveling Sensors