Boom Length: 60m
Overall Weight: 54950kg
· STC1000C Mobile crane adopts creative counterweitht pushing technology. With full-counterweight of 32.5t, when counterweight is pushed backwards for 860mm, stability of the boom can be improved by up to 24%, thus improving lifting capacity and stability.
· Powerful Lifting Capacity
·The 100t Mobile crane has six-section boom of high strength steel structure and optimized U-shaped cross section with max.lifting capacity of 100t, full-extended boom length of 60m, jib length of 18.1m, max.lifting height including jib of 78.1m, reduce weight and improve safety significantly.
· Jib mounting angles are 0°, 15°, and 30°, which ensure fast and convenient change-over between different operating conditions so as to improve working efficiency of the machine.
· Efficient & Unique Hydraulic System
Self-developed dual-pump converging / diversion main valve is used. Converging flow of the single-action dual-pump ensures fast operation and high efficiency; combined-action dual-pump diversion system is applied to ensure stable controllability;
· Electric proportional variable displacement piston pump is used to ensure high-accurate flow control, higher efficiency and energy saving.
· Excellent Traveling Performance
· 5-axle chassis with multiple braking modes are applied to provide more reliable traveling performance; The use of tipping over early-warning technology guarantees high stable and safe operation.
· Intelligent Electronic Control
· Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real time.
· Load Moment Limiter
· Equipped with the comprehensive intelligent protection system is used with accuracy within 5%. The adoption of comprehensive logic and interlock control system ensures more safe and reliable operation.
· More Safe Devices
· Main and auxiliary winches are equipped with over roll-out limiter to prevent over rolling-out of wire rope.
· Boom and jib ends are equipped with height limiters respectively to prevent over-hoisting of wire rope.
· Hydraulic system is configured with the balance valve, overflow valve and two-way hydraulic lock etc., to ensure stable and reliable operation.
|
Capacity |
Max. lifting capacity |
100t |
|
Dimensions |
Overall length |
15400mm |
|
Overall width |
3000mm |
|
|
Overall height |
4000mm |
|
|
Axles |
5 |
|
|
Axle distance-1,2 |
1980mm |
|
|
Axle distance-2,3 |
3120mm |
|
|
Axle distance-3,4 |
1450mm |
|
|
Axle distance -4, 5 |
1500mm |
|
|
Weight |
Overall weight |
54950kg |
|
Front axle load |
18500kg |
|
|
Rear axle load |
36450kg |
|
|
Engine |
Model |
BENZ |
|
Rated power |
350kw/1800rpm |
|
|
Rated torque |
2300N·m/1080rpm |
|
|
Emission standard |
Euro Ⅲ |
|
|
Traveling |
Max. traveling speed |
85km/h |
|
Min.turning radius |
11m |
|
|
Min.turning radius of boom head |
14m |
|
|
Drive train |
10 × 6 × 6 |
|
|
Min. ground clearance |
310mm |
|
|
Approach angle |
21° |
|
|
Departure angle |
18° |
|
|
Max. gradeability |
45% |
|
|
Fuel consumption per 100km |
≤ 70 L |
|
|
Main Performance |
Temperature range |
– 20 ℃ ~ + 40 ℃ |
|
Min.lifting radius |
3m |
|
|
Tail swing radius of superstructure |
4.695m |
|
|
Boom section |
6 |
|
|
Boom shape |
U-shaped |
|
|
Max. lifting moment-Base boom |
4320kN·m |
|
|
Max. lifting moment-Full-extend boom |
1800kN·m |
|
|
|
|
|
|
Length-Base boom |
13.25m |
|
|
Length-Full-extend boom |
60m |
|
|
Length-Full-extend boom+jib |
78.1m |
|
|
Outrigger span(Longitudinal/Transversal) |
7.6×7.6m |
|
|
Jib offset |
0 ° 15 ° 30 ° |
|
|
Working Speed |
Max. single rope lifting speed of main winch(no load) |
|
|
Max. single rope lifting speed of auxiliary winch(no load) |
123m/min |
|
|
Full extend/retract time of boom |
480 / 500s |
|
|
Full raise/lower time of boom |
60 / 110s |
|
|
Swing speed |
0~1.6 r/min |
|
|
Aircondition |
HVAC in up cab |
Cooling and Heating |
|
HVAC in low cab |
Cooling and Heating |
