SMALL MILLING MACHINE VSM50
SMALL MILLING MACHINE VSM50
- Milling width : 2000MM
- Transmission Type : Hydraulic
1. The milling depth control is adjusted by the and right rear leg movements, allowing wedge milling with different adjustment positions of the and right legs; and a depth indicator on the rear leg to show the milling depth.
2. Can be 500mm and 350mm two milling drums quickly switch to meet the needs of different conditions.
3. The rear wheel is an independent suspension support wheel. Right rear wheel can be put back in the back, easy to paste edge milling.
| Model | VSM50 | ||
|---|---|---|---|
| Max. milling with | mm | 500 | |
| Max. milling depth | mm | 120 | |
| Milling wheel | Number of tools | 44 | |
| Drum diameter with tools | mm | 660 | |
| Engine | Model | 4BTA3.9-C110 | |
| Rated power | kW | 82 | |
| Rated speed | rpm | 2200 | |
| Specifications | Operating speed | m/min | 0～30 |
| Travel speed | kmh | 0～6 | |
| Ground clearance | % | 60 | |
| Ground clearance | mm | ≤120 | |
| Operating weight | kg | 7000 | |
| Volume | Fuel tank | L | 140 |
| Hydraulic oil tank | L | 120 | |
| Water tank | L | 300 | |
| Conveyor | Width | mm | |
| Measurement | Overall machinery LxWxH | mm | 3470×1895×3070 |
| Conveyor LxWxH | mm | ||
| Travel mode | Tire | ||
Feedback from contact with us
Related Product
