Sany SYG5530THB 62 truck-mounted concrete pump has 62m vertical reach with the height limit programmed to prevent boom contact with an obstruction or overhead hazard. The 62m concrete pump provides the users reliable pumping performance along with the highly wear resistant parts including delivery pipe, discharge port, transition bushing, concrete piston, wear plate, cutting ring and delivery cylinder that improve the pumping efficiency and reduce down time.

One Button Stabilization Technology

The one button stabilization technology quickly dampens any boom movement resulting from repositioning the boom. This allows precise positioning of the end hose.

Boom Anti Vibration Technology

The boom anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.

Energy Saving Technology

With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.

Anti Overswing Technology

By adopting our new swing brake technology, the boom's overswing amplitude is reduced by 60%

Fault Self Diagnostic Technology

Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

Smart Boom System

One Button Boom Extend/Retract

Press upward on the boom extend/retract button to extend the boom or press downward to retract the boom automatically.

Coordinated Section Operation

The boom can be rapidly and accurately repositioned by coordinating the movement the first and second sections

Safety Technology

Boom Overload Protection Technology

Relief valves are mounted on the boom cylinder counterbalance valves. These valves will release pressure in the event of excessive boom load to prevent damage to the boom.

Hopper Screen Interlock Technology

As an operator protection measure, the pump will automatically stop when the hopper screen is opened.

Hydraulic Oil Level Monitoring

The oil level in the hydraulic reservoir is continually monitored. If the level drops below a preset level, an alarm will sound and the pump will be stopped to prevent damage to the hydraulic system.

Model		SYG5530THB 62
Length (mm)		15730
Width (mm)		2500
Height (mm)		4000
Empty Weight (kg)		53000
Vertical Reach (m)		62
Horizontal Reach (m)		57.6
Reach Depth (m)		42
Unfolded Reach (m)		16.2
1st Section	Length (mm)	12140
	Articulation	90。
2nd Section	Length (mm)	10090
	Articulation	180°
3rd Section	Length (mm)	9570
	Articulation	180°
4th Section	Length (mm)	12280
	Articulation	230°
5th Section	Length (mm)	7945
	Articulation	200°
6th Section	Length (mm)	5100
	Articulation	100°
Rotation		±270°
Outrigger Spread L-R---Front (mm)		11420
Outrigger Spread L-R---Rear (mm)		13880
Output	Low-pressure (m3/h)	180
	High-pressure (m3/h)	125
Pressure	Low-pressure (Mpa)	8.3
	High-pressure (Mpa)	12
Max. Strokes per Minute	Low-pressure (times/min)	29
	High-pressure (times/min)	19
Delivery Cylinder Diameter (mm)		260
Stroke Length (mm)		2100
Hydraulic System		Open
Hydraulic System Oil Pressure (Mpa)		32
Hydraulic Tank Capacity (L)		650
V\feter Tank Capacity (L)		700
Pipe Size (mm)		125
End Hose Length (m)		3
End Hose Diameter (mm)		125
Chassis Model		BENZACTROS5041 1〇x4
Engine Model		OM501 LA.IV/3
Engine Power (kW/rpm)		300/1800
Emissions		Tier IV /Tier III
Fuel Tank Capacity (L)		400
Displacement (L)		11.946